| FASTEST
MOST ACCURATE WAY FOR COUNTING, WEIGHING, FILLING AND
BATCHING - AND MOST
ECONOMICAL!
The ideal single scale automatic
netweighing system for either production runs or "small"
projects - at the cost of little more than a counting scale.
Simply enter the job # you wish to
run and you are in operation. Change jobs in seconds.
Use for filling of your product into
bags, containers or boxes, etc. Dump is either by foot switch or automatically. For
Inventory Control, count incoming parts and then package them into
smaller quantities for distribution to production.
Amazingly versatile - almost any dry
product runs to 1% accuracy. Light weight but rugged and the finest
stainless steel construction you have ever seen - easily
cleanable. Hoppers and feeders pans may be removed for immersion
cleaning. Various bulk gates and discharge chutes available.
Tridyne tests your products and sets
up all initial parameters before shipping - you simply plug the
system in and RUN. Complete, easy to understand manual and unlimited
free telephone support!
|
The new F98-X |
| USER
PROGRAMMABLE CONTROLLER STORES 10 JOBS IN NON-VOLATILE MEMORY
- NO BATTERY BACK UP |
Model 200 Controller
|
| The Sophisticated
Model 200 Microprocessor Controller allows you to enter over
30 different parameters for each of up to 10 jobs - and
maintains them in memory until you wish to alter them. No
disks or tapes to change. Arrow cues indexed LED illuminated
cursor to each command - no code or programming to learn. Auto
or manual dump plus "Monitor" and "Hold"
status indicators.
The Controller contains a
unique, built-in calibration function all done by software.
There are no mechanical adjustments required.
Constructed of rugged stainless
steel with industrial grade connector. All high grade solid
state components are burned in for years of trouble free use.
There are no moving parts. Overnight factory service - there
is no need for you to keep spares.
Interfacing available for
baggers, conveyors, etc.
FREE
PRODUCT ANALYSIS SERVICE |
|
F98/200
SYSTEM SPECIFICATIONS
STANDARD
CAPACITIES : 2-11 lbs (1,2,&5 kg) ACCURACY:
1% of full capacity (static)
NETWEIGHER
DIMENSIONS:
Width - 16 inches (41 cm)
Depth - 28 inches (71 cm)
Height - 27.5 inches (70 cm)
(Dimensions may vary depending on product and storage requirements)
POWER
REQUIREMENTS: 115VAC, 60Hz, 100VA AIR
REQUIREMENTS:
60 PSI @ 0.1
CFM SPEED:
to 20 dumps/ minute WEIGH
HOPPER CAPACITY 195 cubic inches STORAGE
HOPPER CAPACITY: 1.5 cubic feet INFORMATION
DISPLAY:
4 digit LED numerical display, 40 position LED
illuminated cursor cue status indicators KEYBORAD
INPUT: 16 character integral keyboard with audible and display
feedback STATUS
INDICATORS: Light emitting diodes: "Under",
"Good", "Over" , "Error" plus function
and parameter status MEMORY:
Non-volatile, user programmable. Retains up to 10 job sets of
parameters. Accessed by numerical Entry Code. MICROPROCESSOR:
6809 with external crystal running at 4 MHz HARDWARE
INTERFACING: With/to baggers, conveyors, etc. through industrial
environment rated connnectors. |
