| FASTEST
MOST ACCURATE WAY FOR COUNTING, WEIGHING, FILLING AND
BATCHING - AND MOST
ECONOMICAL!
Netweighing or weighcounting is an
excellent method of dispensing most dry flowable products, whether
powder, pellets or small parts. Tridyne netweighers feature either
single or dual vibratory feed systems and provide two-stage feeding.
The initial stage feeds at high rate until a preset weight just
below your weight has been reached. At this point, the bulk or fast
feed ceases and the dribble or final topping off stage takes over.
During the brief dribble stage, the feeder (s) slows, the bulk gate
closes, and a fine stream completes the fill.
Operation:
The Tridyne Direct Fill Platform
Scale comes with two different configurations on DF-98 and DF-108.
DF-98 is controlled with the Model 200 controller and DF-108 can be
set-up with either the Model 2000 controller or PLC control.
Depending on the customer's application, Tridyne will determine the
appropriate system to fulfill the customer's needs.
The Direct Fill Scale is a single or
dual feed bulk filling system, which is controlled with the Model
200, 2000 or PLC controller. This model weighs the product in the
container as it is filling. Containers may be placed on the scale
platform either manually or with an automatic indexing system.
Feed begins at a high speed until
setable bulk point is reached. Weighment is then "topped
off" until exact target is reached and system is then latched.
All weights are easily microprocessor
programmable - no counterweights are required. One person can index
containers, seal and palletize while the scale is performing the
automatic fill of the exact weighment. No checkweighing is
necessary.
|
SPECIFICATIONS |
OPTIONS |
- Static Accuracy -- 0.1% of
full load
- Speed - Depends on product
and weighment
- Dimensions - Vary with
application
- Auto Zero
- Auto Tare
|
- Stainless Steel Contact
Parts
- Storage Hopper - Surge Pan -
Vibratory Infeed
- Dual Feeders
- Power or Gravity Conveyors
- Carton Indexing On-Off
- Interface with conveyors,
cartoners etc.
- 2000 Controller -- 0.1%
accuracy, Multi Scale Independent Control, Extended Job
Memory
- 200 Controller -- 1%
accuracy, single scale control, stores up to ten jobs in
memory
- Box in place sensor
- Extra Dribble inserts (if
needed)
- Power conveying/on-off scale
automatic indexing
|
|
Technical
Specification:
Running Speed: Up to 8 dumps per minute, subject to product dimension and density.
Finish: Stainless steel contact surfaces.
Power Requirements: 120 VAC, 60 Hz (dedicated circuit preferred),
500 Watts maximum
Air Requirements: 60 PSIG
Design Features Include:
- Single or dual vibratory feeders and stainless steel pans
- 5-10-20-50-100-200 Kg capacity platform scale with load cell
- 5 cu ft stainless steel supply hopper
- Bulk gate to control the product flow from the feeder to
container
- Dribble insert to control the product to maximize accuracy
- Foot switch for manual operation
- Interface port for automatic operation
- All necessary air & electrical fittings/wiring
- White enamel painted HRS stand
Tridyne model 2000 controller features include:
- 0.1% system static accuracy
- 16-character alpha-numeric display
- Dual membrane keypad
- 26 job built-in non-volatile memory expandable to 4,096 jobs
- Up to 8 scale simultaneous or independent operation or single
controller
- Menu callup of job parameters which are all field adjustable
and saved in non-volatile memory
- Field programmable interface sequence
- Scale sequencing and multi-dump per scale selection
- 2 complete system manuals & unlimited telephone support
|
